 |
 |
 |
 |
SOTA DIN cable with Dome Snaps
This is a replacement cable with 1/4 inch dome snaps and a DIN connector. This cable is used with the SOTA Zapper ZHC5 and the Bio-Tuner BT7.
This cable uses a DIN connector to plug into the zapper or BT7. Because of the DIN connector it will NOT work with older SOTA units, such as the ZHC3 or BT6, or any other zappers that we are aware of, including the Scada RSG1 Combo unit and the Auto-Zap.
If you have an older SOTA unit that does not use a DIN connector you can use a DIN Adapter (available from us as an accessory item) to connect correctly.
This is just the cable. It does not include any straps or headset. |
|
 |
 |
|
 |
|
 |

| Accessories for this product... |
|
|
|

|