| Unique Features
New Hand-Paddle design. Our pulsing coil has been re-designed into a custom molded plastic enclosure complete with clear identification of the Bio-North (-) Magnetic Pole.
A unique circuit design allows the Magnetic Pulser to operate without the use of a Xenon flashtube allowing for maximum power delivery to the coil.
Fully Automatic. The MPG5 will automatically charge and discharge - no manual pulsing required.
An internal Digital Counter allows the MPG5 to pulse approximately 20 minutes between resets.
LED light bar-graph. A light bar-graph consisting of five Green LED lights, illuminates sequentially giving visual indication of the MPG5 charging up. A Red LED light indicates either the unit has completed a 20 minute cycle of pulses, or an overload condition has occurred.
AUDIBLE output option. Unit beeps each time magnetic pulse is released to coil.
Operates from an AC-DC Wall Adapter (included), or from a 12 Volt DC source like an automobile battery, appropriate solar panel, etc.
Extremely high magnetic power output. Generates a maximum 42.18 Joules (Watt*Seconds) of energy through the use of a 600uF, 330VDC Custom Photoflash Capacitor. This produces a ~43,133 Gauss (~43 kilo Gauss) magnetic field in the coil. This 43,133 Gauss measurement is at the inter-coil winding flux. Magnetic flux intensity follows the inverse square rule - the further you are away from the magnetic core, the faster the Gauss intensity drops off. At face of Magnetic Coil, the Gauss drops to ~6,000 Gauss.
High-Frequency Custom Switch Mode Pulse-Width-Modulated (PWM) power supply allows for fast charges (3.5 seconds) and a very lightweight unit. Our PWM power supply is a constant-current design. Double-insulated practices used throughout to ensure the greatest electrical safety.
Coil is completely enclosed in a custom-molded plastic Hand Paddle. No exposed wires or leads.
New Professional Capacitor. We now have a Professional Custom Strobe type Capacitor designed specifically for our Magnetic Pulser. The manufacturer rates the capacitor at well over a 30 million (30,000,000) cycles of operation. Compare this with our earlier version model MPG2 and MPG3 which had a 250,000 cycle life, or to our MPG1 which had a 85,000 cycle life, or even to photoflash based pulsers that have 5,000 - 10,000 life cycle.
Very Fast charging cycle. Unit fully charges in 3.5 seconds. Overload Protection. Should an overload or fault condition occur in the charging section, a sensor will limit the current, then eventually shutdown the unit until the fault condition is removed.
Bio-North Magnetic Pole Polarity (-) or South-Seeking is clearly identified on one side of pulsing coil. This gives the user the choice of applying either Bio-North (-) or Bio-South (+) pole energy to the site.
Our Electrical Circuit Boards are GOLD Plated for extreme reliability and workmanship.
Compact and lightweight. MPG5 unit weighs 3/4 Lbs. (0.3 Kg.), Magnetic coil weighs 1 Lb. (0.4 Kg.).
Total shipping weight of complete MPG5 with wall adapter weighs ~3 Lbs. (~1.3 Kg.). |
Thank You Very Much!!! 
